Insert the SIM card and battery
Important: This device is designed to be used with a standard SIM card (see figure)
only. Use of incompatible SIM cards may damage the card or the device, and may
corrupt data stored on the card. Please consult your mobile operator for the use of
a SIM card that has a mini-UICC cutout.
Get started
5
This phone is intended for use with a BL-4U battery. Always use original Nokia
batteries.
The SIM card and its contacts can be easily damaged by scratches or bending, so be
careful when handling, inserting, or removing the card.
1 Place your finger in the gap on the edge of the phone, and carefully lift and remove
the back cover. If the battery is inserted, lift the battery out.
2 Slide the SIM card holder to unlock it, and use your fingernail to lift it.
3 Make sure the contact area of the SIM card is facing down, and place the card in
the holder. Slide the card holder to lock it
6
Get started
4 Line up the contacts of the battery and the battery compartment, and insert the
battery. To replace the back cover, direct the bottom locking catches toward their
slots (1), and press the cover, until it locks into place (2).